Top 10 Best Gunsmithing Tools [2022]

Last Update:

Are you looking for the Best Gunsmithing Tools. You are in the right place. Our team went through about 51167 reviews available online for Gunsmithing Tools. We chose the finest ones, and prepared this list for you.

Comparison Chart of Top 10 Gunsmithing Tools

Best Gunsmithing Tools
Disclaimer: As An Amazon Associate We Earn From Qualifying Purchases.
NoProductScoreAction
1Wheeler 30 Piece SAE/Metric Hex and Torx P-Handle Set for Pistol Rifle Handgun Gunsmithing Rebuild and Maintenance9.6Buy On Amazon
2Wheeler 55 Piece SAE/Metric Hex and Torx Screwdriver Set for Pistol Rifle Handgun Gunsmithing Rebuild and Maintenance9.6Buy On Amazon
3Wheeler Engineering 89-Piece Deluxe Screwdriver Set with Durable Construction and Storage Case for Gunsmithing and Maintenance9.4Buy On Amazon
4WEAVER 849719 Deluxe Gunsmith Tool Kit9.4Buy On Amazon
5W WIREGEAR Punch Set Gunsmith Punch Set Elite Gunsmithing Tool Made of Solid Material Including Steel Punch and Hammer with Bench Block Ideal for M1911 and Other Pistols for Gunsmithing Maintenance9.2Buy On Amazon
6Real Avid Hammer & Punches + Smart Bench Block9.2Buy On Amazon
7KNINE OUTDOORS Gunsmith Screwdriver Set Engineering Gunsmithing Gun Maintenance Tools Durable Construction Accessories with Ratcheting Wrench Rubber Mallet Bits Wrenches Adapters Pin Punches9Buy On Amazon
8Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement8.8Buy On Amazon
9HORUSDY 22-Pieces Gunsmithing Tool8.4Buy On Amazon
10Wheeler Engineering Hammer and Punch Set with Brass8.4Buy On Amazon

Gunsmithing Tools Reviews

We have checked about 51167 reviews for gunsmithing tools. It was quite difficult to shortlist the ideal ones from thousands of variants online. However, we've tried our best to make sure that you get only the best one from our suggestions.

Table Of Content:

1. Wheeler 30 Piece SAE/Metric Hex and Torx P-Handle Set for Pistol Rifle Handgun Gunsmithing Rebuild and Maintenance

  • SPECS: 30-piece p-handle driver set (SAE/Metric, Hex and Torx)
  • SAE HEX BITS: 3/32″ and standard 7/64″ and ball 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8″.
  • METRIC HEX BITS: standard 1.5mm, ball 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
  • TORX BITS: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
  • CONVENIENT: Comes with a molded stand that can sit on bench top and has mounting holes on back for hanging.
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler.

2. Wheeler 55 Piece SAE/Metric Hex and Torx Screwdriver Set for Pistol Rifle Handgun Gunsmithing Rebuild and Maintenance

  • 55 piece Hex/Torx screwdriver set includes, sae Hex, metric Hex, Torx and Phillips heads
  • Includes sae Hex bits- .
  • Includes metric Hex bits- .
  • Includes Torx bits- T1, T2, T3, T4, TT5 TT6, TT7, TT8, TT9, TT10, TT15, TT20, TT25, TT30, TT35, TT40, TT45, TT50.
  • Includes Phillips bits- #1, #2 and flat bits #14 and #32
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler.

3. Wheeler Engineering 89-Piece Deluxe Screwdriver Set with Durable Construction and Storage Case for Gunsmithing and Maintenance

  • VERSATILE: Wheeler’s engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation.
  • FEATURES: (54) hollow-ground flat bits, (15) specialty bits, (8) Allen, (4) Phillips, (3) Torx, (1) 2 ¼ shaft extension and (1) hex-to-square drive adapter.
  • EASE OF USE: Hollow-ground bits have a concave shape that allows for insertion all the way into the screw slot for maximum contact.
  • INCLUDES: 2 non-slip, over molded plastic handles with a convenient hinged storage case
  • DURABLE: Constructed of strong, S2 tool steel
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler.

4. WEAVER 849719 Deluxe Gunsmith Tool Kit

  • 88 piece kit features a comprehensive assortment of professional-grade components
  • Includes high-quality steel punch set with multiple sizes to fit a variety of pins
  • Hammer features brass and plastic faces for precision adjustments
  • 88-piece kit features a comprehensive assortment of professional-grade components
  • Includes high-quality steel punch set with multiple sizes to fit a variety of pins
  • Hammer features brass and plastic faces for precision adjustments

5. W WIREGEAR Punch Set Gunsmith Punch Set Elite Gunsmithing Tool Made of Solid Material Including Steel Punch and Hammer with Bench Block Ideal for M1911 and Other Pistols for Gunsmithing Maintenance

  • 【HAMMER】With bigger and heavier hammer head, the hammer is easier to hit.
  • 【PUNCHES】All the steel punches are treated specially, which makes it more durable and sturdy than other brands.
  • 【INCLUDES】A bench block, 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 steel punches, 3/8, 5/16, 15/64 plastic punches, a pin alignment tool, a hammer and 4 detachable hammer heads.
  • 【BENCH BLOCK】Unlike similar products on the market, our gun bench block has made two improvements.
  • 【PRODUCT GUARANTEE】We analyzed customer feedback and found that customers are stating that the 1/16 punch pin bends.

6. Real Avid Hammer & Punches + Smart Bench Block

  • ESSENTIAL GUNSMITHING TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and STANDARD PUNCHES Set paired up with innovative Smart Bench Block.
  • GUNSMITHING HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon; grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pi.
  • STANDARD, FLAT TIP PIN PUNCHES FOR ANY GUN: hardened steel, nickel plated flat tip punches for driving out solid pins.
  • Includes 9/32, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 3/32, 5/64, 1/16″ nickel-plated, hardened steel pin punches.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • SMART BENCH BLOCK: non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage.
  • INCLUDES 1911 BUSHING WRENCH: effortlessly remove 1911 Government profile bushings

7. KNINE OUTDOORS Gunsmith Screwdriver Set Engineering Gunsmithing Gun Maintenance Tools Durable Construction Accessories with Ratcheting Wrench Rubber Mallet Bits Wrenches Adapters Pin Punches

  • ALL-in-ONE: Our 100-piece gunsmithing toolset (including case) has almost everything you need for convenient and effective gun repair and maintenance.
  • SUPERIOR MATERIAL: This gunsmith toolset is made of strong and sturdy S2 steel.
  • Toolset Includes: 54 Flat bits, 15 Specialty Gunsmith bits, 8 Hex bits, 4 Phillips bits, 3 Torx bits, 2 square to hex adapter, 1 bit extension, 8 punches, 1 long non-slip handle, 1 short non-slip handle, 1 hammer, 1 magnetic collector, 1 toolbox.
  • All Collected: The portable box is designed for well-organizing, storage, and transport.
  • SATISFACTION GUARANTEED: Our strong warranty and friendly customer service have your six covered.

8. Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement

  • ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds; 40 – 65 is +/- 5%
  • EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
  • RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds
  • DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”
  • INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case.
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler.

9. HORUSDY 22-Pieces Gunsmithing Tool

  • Double Face Hammer】Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use.
  • Steel Punches】8Pcs roll pin punch including 1/16″, 5/64″, 3/32″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″ and 1/4″.
  • 2Pcs Blot Catch Install Punches】: 3/32″, 5/32″, one with counter-bored tips to start roll pins and one with indexing tips to finish roll pins.
  • Quality Steel】4Pcs steel punches including: 2 each of 1/16″ and 3/32″, after special treatment,pins are durable.
  • Special Plastics】2Pcs sturdy plastic punches including 15/64″, 3/8″,used special treatment of plastic, has higher hanroness ang higher density.

10. Wheeler Engineering Hammer and Punch Set with Brass

  • DIMENSIONS: 9.75″ L x 5.25″ W x 2″ D
  • NON-DESTRUCTIVE: Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use.
  • BE PREPARED: Features brass, steel and nylon solid punches making it the ideal kit for your workbench.
  • INCLUDES: 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″ and 5/16″ brass punches, (2) 1/16″, (2) 3/32″ steel punches, 15/64″, 3/8″ plastic punches.
  • STORAGE: Comes with a convenient plastic molded storage case
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler.

Gunsmithing Tools Buying Guide


Does the thought of finding a great Gunsmithing Tools stress you out? Has your mind been juggling between choices when it comes to buying Gunsmithing Tools in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Gunsmithing Tools for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Gunsmithing Tools Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Gunsmithing Tools in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Gunsmithing Tools currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Gunsmithing Tools brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Gunsmithing Tools based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Gunsmithing Tools before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Gunsmithing Tools they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Gunsmithing Tools, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Gunsmithing Tools before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Gunsmithing Tools will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Gunsmithing Tools if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Gunsmithing Tools on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Gunsmithing Tools on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Gunsmithing Tools featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.